All productsShowing 1–18 of 107 results
C101 Gear Pump
In stock
| Model code |
C101 |
|---|---|
| Teeth width (in) |
20: 2.0” , 25: 2.5" |
| Circuit |
2 circuits (without 3 circuit sleeves) , 3 circuits (with 3 circuit sleeves) |
| Rotation |
L: Left (counter-clockwise) |
| Operation style |
R: Right rotation (clockwise) , AS: Pneumatic , MS: Manual |
| Safety valve pressure |
20: 14 MPa, 25: 17.5 MPa, 27: 20 MPa |
C102 Gear Pump
In stock
| Model code |
C102 |
|---|---|
| Teeth width (in) |
20: 2.0” , 25: 2.5" |
| Circuit |
2 circuits (without 3 circuit sleeves) , 3 circuits (with 3 circuit sleeves) |
| Rotation |
L: Left (counter-clockwise) |
| Operation style |
R: Right rotation (clockwise) , AS: Pneumatic , MS: Manual |
| Safety valve pressure |
20: 14 MPa, 25: 17.5 MPa, 27: 20 MPa |
CBG Series Gear Pump
In stock
| Displacement |
32 cc/rev, 40 cc/rev, 45 cc/rev, 50 cc/rev, 63 cc/rev, 80 cc/rev, 100 cc/rev, 125 cc/rev, 140 cc/rev, 160 cc/rev |
|---|---|
| Flange Version |
A-Oval Flange, B-Square Flange |
| Shaft Type |
H: Rectangle Spline, X: Involute Spline, P: Plain Key |
| Port Position |
1: side in side out |
| Rotation |
L: Left (counter-clockwise), R: Right (clockwise) |
CBGJ Series Gear Pump
In stock
| Displacement |
32 cc/rev, 40 cc/rev, 45 cc/rev, 50 cc/rev, 63 cc/rev, 80 cc/rev, 100 cc/rev, 125 cc/rev, 140 cc/rev, 160 cc/rev |
|---|---|
| Flange Version |
A-Oval Flange, B-Square Flange |
| Shaft Type |
H: Rectangle Spline, X: Involute Spline |
| Port Position |
1: side in side out |
| Rotation |
L: Left (counter-clockwise), R: Right (clockwise) |
CBHST1 100 SK ISO Gear Pump
In stock
| Model code |
CBHST1-100 |
|---|---|
| Displacement |
100 cc/rev |
| Mounting |
B: Square flange |
| Joining port |
L: Screw |
| Shaft Type |
H: Rectangle Spline |
| Rotation |
L: Left (counter-clockwise) , R: Right (clockwise) |
| Port Position |
1: side in side out , 2: side in bottom out , 3: bottom in bottom out , 4: bottom in side out |
CBHST1 SK UNI Gear Pump
In stock
| Model code |
CBHST1-SK |
|---|---|
| Displacement |
63 cc/rev, 80 cc/rev |
| Mounting |
B: Square flange |
| Joining port |
L: Screw |
| Shaft Type |
H: Rectangle Spline |
| Rotation |
L: Left (counter-clockwise) , R: Right (clockwise) |
| Port Position |
1: side in side out , 2: side in bottom out , 3: bottom in bottom out , 4: bottom in side out |
CDB15 Series Directional Control Valve
In stock
| Control Method |
manual |
|---|---|
| Rated Flow |
63 L/min (16.6 gpm) |
| Rated Pressure |
200 bar (20 MPa) |
| Nom. Diameter |
15 mm |
| Dividing Flow |
8-12 L/min |
| Dividing Flow Valve Pressure |
90 bar (9 MPa) |
| Number of Spools |
1 spool, 2 spool, 3 spool, 4 spool, 5 spool, 6 spool, 7 spool, 8 spool, 9 spool, 10 spool |
| Valve Sections |
1-10 Sections |
DC15 Series Directional Control Valve
In stock
| Max Flow |
45 L/min |
|---|---|
| Rated Pressure |
250 bar (25 MPa) |
| Oil Temp Range |
-20°C to +80°C (-4°F to +176°F) |
DCV Directional Control Valve
In stock
| Flow |
20~200 L/min |
|---|---|
| Number of spools |
1~12 spools |
| Inlet section type |
Side inlet, withrelief vaive, lnlet port on top of inletsection,Outiet onoutlet section (only forDCV60-100see table7F5-8), Top inlet,withrelief valve, Inlet and outletpart ontop of inlet section(only for DCV60-100match F7 in table 7) |
| Relief valve set pressure |
100~250 bar |
| Control type |
manual, joystick,cable, solenoid, pneumatic, electro-hydraulic, electro-pneumatic |
| Spool type |
3 positions,double acting, 3 positions.double acting.A&B open, 3 positions,double actingA open.B blocked, 3 positions, double actingA blocked.B open, 3 positions,singleacting in A.A open, 4 positions,doubleacting with 4th floatingposition |
| Port size |
G1/4, G3/8, G1/2, G3/4, G1, M16X1.5, M18X1.5, M20X1.5, M22X1.5, M27X2, 5/8-12UNF, 3/4-16UNF, 7/8-14UNF, 1-12UNF, 11/8-12UNF, NPT3/8, NPT1/2, NPT3/4, NPT1 |
DCV100 Electro-hydraulic Directional Control Valve
In stock
| Control Method |
electro-hydraulic |
|---|---|
| Presure Medium |
Mineral oil based hydraulic oil |
| Nominal Flow |
100 L/min |
| Viscosity Range |
12 CST-400 CST |
| Operating Pressure |
350 bar (35 MPa) |
| Internal Leakage |
15 cc/min at 160 bar, 50℃ |
| Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
| Valve Structure |
Sectional Valve |
| Valve Surface |
Phosphating treating |
| Valve Sections |
1-12 Sections |
| Rustproof Level |
Neutral salt spray test, 48hours |
DCV100 Electro-pneumatic Directional Control Valve
In stock
| Control Method |
electro-pneumatic |
|---|---|
| Presure Medium |
Mineral oil based hydraulic oil |
| Nominal Flow |
100 L/min |
| Viscosity Range |
12 CST-400 CST |
| Operating Pressure |
350 bar (35 MPa) |
| Internal Leakage |
15 cc/min at 160 bar, 50℃ |
| Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
| Valve Structure |
Sectional Valve |
| Valve Surface |
Phosphating treating |
| Valve Sections |
1-12 Sections |
| Rustproof Level |
Neutral salt spray test, 48hours |
DCV100 Manual Directional Control Valve
In stock
| Control Method |
manual |
|---|---|
| Presure Medium |
Mineral oil based hydraulic oil |
| Nominal Flow |
100 L/min |
| Viscosity Range |
12 CST-400 CST |
| Operating Pressure |
350 bar (35 MPa) |
| Internal Leakage |
15 cc/min at 160 bar, 50℃ |
| Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
| Valve Structure |
Sectional Valve |
| Valve Surface |
Phosphating treating |
| Valve Sections |
1-12 Sections |
| Rustproof Level |
Neutral salt spray test, 48hours |
DCV100 Pneumatic Directional Control Valve
In stock
| Control Method |
pneumatic |
|---|---|
| Presure Medium |
Mineral oil based hydraulic oil |
| Nominal Flow |
100 L/min |
| Viscosity Range |
12 CST-400 CST |
| Operating Pressure |
350 bar (35 MPa) |
| Internal Leakage |
15 cc/min at 160 bar, 50℃ |
| Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
| Valve Structure |
Sectional Valve |
| Valve Surface |
Phosphating treating |
| Valve Sections |
1-12 Sections |
| Rustproof Level |
Neutral salt spray test, 48hours |
DCV140 Electro-hydraulic Directional Control Valve
In stock
| Control Method |
electro-hydraulic |
|---|---|
| Presure Medium |
Mineral oil based hydraulic oil |
| Nominal Flow |
140 L/min |
| Viscosity Range |
12 CST-400 CST |
| Operating Pressure |
350 bar (35 MPa) |
| Internal Leakage |
15 cc/min at 160 bar, 50℃ |
| Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
| Valve Structure |
Sectional Valve |
| Valve Surface |
Phosphating treating |
| Valve Sections |
1-12 Sections |
| Rustproof Level |
Neutral salt spray test, 48hours |
DCV140 Electro-pneumatic Directional Control Valve
In stock
| Control Method |
electro-pneumatic |
|---|---|
| Presure Medium |
Mineral oil based hydraulic oil |
| Nominal Flow |
140 L/min |
| Viscosity Range |
12 CST-400 CST |
| Operating Pressure |
350 bar (35 MPa) |
| Internal Leakage |
15 cc/min at 160 bar, 50℃ |
| Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
| Valve Structure |
Sectional Valve |
| Valve Surface |
Phosphating treating |
| Valve Sections |
1-12 Sections |
| Rustproof Level |
Neutral salt spray test, 48hours |
DCV140 Manual Directional Control Valve
In stock
| Control Method |
manual |
|---|---|
| Presure Medium |
Mineral oil based hydraulic oil |
| Nominal Flow |
140 L/min |
| Viscosity Range |
12 CST-400 CST |
| Operating Pressure |
350 bar (35 MPa) |
| Internal Leakage |
15 cc/min at 160 bar, 50℃ |
| Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
| Valve Structure |
Sectional Valve |
| Valve Surface |
Phosphating treating |
| Valve Sections |
1-12 Sections |
| Rustproof Level |
Neutral salt spray test, 48hours |
DCV20 Manual Directional Control Valve
In stock
| Control Method |
manual |
|---|---|
| Presure Medium |
Mineral oil based hydraulic oil |
| Nominal Flow |
20 L/min |
| Viscosity Range |
12 CST-400 CST |
| Operating Pressure |
350 bar (35 MPa) |
| Internal Leakage |
15 cc/min at 160 bar, 50℃ |
| Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
| Valve Structure |
Monoblock Valve |
| Valve Surface |
Phosphating treating |
| Valve Sections |
1-6 sections |
| Rustproof Level |
Neutral salt spray test, 48hours |
Recently Viewed Products
Our Products and Services
Here's what we can do
Our main products include Directional Control Valves, Gear Pumps, Steering Equipment, and Power Units, with over 500 models that are widely used in various industries such as construction, sanitation, drilling, and mining. In addition to our standard product offerings, we also support OEM/ODM services, allowing us to customize hydraulic products according to our customers' specific needs and requirements. Our professional R&D team and advanced production technology ensure the quality and timely delivery of our products, while our comprehensive pre-sales and after-sales services help our customers improve their product competitiveness.